Protective Primer PCI Gisogrund® 10L
Protective Primer PCI Gisogrund® 10L
Protective Primer PCI Gisogrund® 10L
Protective Primer PCI Gisogrund® 10L
Protective Primer PCI Gisogrund® 10L
Protective Primer PCI Gisogrund® 10L
Protective primer PCI Gisogrund® 10L
Protective primer PCI Gisogrund® 10L
Protective primer PCI Gisogrund® 10L
Protective primer PCI Gisogrund® 10L

Protective primer PCI Gisogrund® 10L

See parts included Technical specification

PCI Gisogrund 10L PCI Gisogrund is a single component, solvent free, fastdrying primer. With PCI Lastogum makes perfect combination to make your shower area waterproof. The primer is recommended for mortar mineral floor leveler, plasters, paint and wallpapers. It is also useful for primer deep penetration to increase strength of ground with insufficient toughness.

PCI Gisogrund characterized with reliable adhesion with tile adhesives. Also, product cures extremely fast - after application, it is walkable after approx. 30-60 minutes.

PCI Gisogrund 10L pail will cover: gypsum based substrates: approx. 65 to 125m², abosrbent mineral substrates: 37-65m² for two coats.

Container

Packaging size. Larger package means better price quaoptionty ratio. If you are not sure how much materials you will need please contact us to receive our quotation.

PG10
Check stock live

Amount of products available off-the-shelf. If order is placed before 3pm, it will be shipped same day with free next business day delivery.

Quantity available in stock for next day delivery:

  • Protective primer PCI Gisogrund® 10L x 2
Total available in stock: 2
Same day shipping and delivery on Monday if you order in next 0 hours 00 minutes and 00 seconds
£119.42
Tax included
To get extra 5% discount you need to increase your cart value by £500.00.
Trade discounts are available both for wholesalers and loyal customers. To receive a discount, your cart total value or overall purchase value or overall account purchases must cross the required threshold. Trade discount policy

ThresholdDiscount
£5005%
£100010%
£200015%
£500020%
£1000025%
£2500030%

 Learn more about trade discounts.
Pay With PayPal

In order to place 1-click PayPal order with your PayPal account or card.
1. Add the products you want to buy to your shopping cart.
2. Use the button below to proceed to checkout.
3. During checkout press 1-click Pay with PayPal button.

Pay With PayPal

Pay With Amazon

In order to place 1-click Amazon order with your Amazon account.
1. Add the products you want to buy to your shopping cart.
2. Use the button below to proceed to checkout.
3. During checkout press 1-click Pay with Amazon button.

Pay With Amazon

Amount Of Product Views 1 Views during the last 24 hours
 

Fields of application:

  • For indoor and outdoor use.
  • For walls and floors.
  • Primer for absorbent substrates to protect subsequent material from too rapid dehydration.
  • Primer prior to the application of flowable and non-sag floor levelling compounds, e. g. PCI Periplan, PCI Periplan fein or PCI Periplan Tixo and other mortars and anhydrite screeds which set through hydration.
  • Primer for anhydrite screeds and building boards.
  • Primer for mastic asphalt screeds prior to the application of PCI tile adhesives.
  • Primer to strengthen mealy, absorbent screed surfaces and plasters indoors prior to the laying of tiles and mosaic.
  • Acting as a moisture barrier and primer for plaster, plaster slabs, gypsum fibre boards, plaster boards, aerated concrete, concrete, asphalt, render and brickwork before tiling and wallpapering.
  • Primer for aerated concrete and brickwork on walls prior to the application of plaster and gypsum lime plaster.

PCI Gisogrund Improves The Adhesion Of Plaster And Lime Gypsum Plaster To Brickwork. PCI Gisogrund improves the adhesion of plaster and lime gypsum plaster to brickwork.

PCI Gisogrund Protects Levelling Compound And Thin - Bed Mortar From Too Rapid Dehydration, Extends The Open Time, Helps I...PCI Gisogrund protects levelling compound and thin-bed mortar from too rapid dehydration, extends the open time, helps improve adhesion and prevents the formation of cracks caused by shrinkage.

PCI Gisogrund Helps Improve The Strength And Solidity Of Old, Mealy Plaster And Increases Adhesion To Tiles, Plaster And W...PCI Gisogrund helps improve the strength and solidity of old, mealy plaster and increases adhesion to tiles, plaster and wallpaper.

Material base
modified acrylic resin dispersion
Components
Single component
Density
approx. 1.0 g/cm³
Control colour
Blue
Packaging size
1 l bag
Shelf life
min. approx. 12 months
Working temperature
+5 °C to +25°C (substrate temperature)
Storage
in dry conditions, no permanent storage over +30°C, but not below -10°C. Frozen PCI Gisogrund should be slowly thawn and stirred thoroughly.
Walkable after
approx. 30 - 60 minutes
Carriage of Dangerous Goods by Road, Rail and Inland Waterways
non hazardous
Regulation for hazardous substances
no labelling requirement for this product
2nd coat after
approx. 30 - 60 minutes
subsequent application after
approx. 60 - 180 minutes (depending on the absorbency of the substrate as well as temperature and humidity)
Temperature resistance of cured film
-20°C to +80°C

Preparation of substrate

The substrate must be structurally sound, clean and able to bear weight. Remove oil stains, residues which could impair adhesion such as waterproof adhesive residues, cement paste and dirt very thoroughly. Newly applied cement screeds must have a moisture content level not exceeding 4%, rough-ground anhydrite and/or gypsum based screeds not more than 0.5% (measured with CM meter).



Application procedure


Priming and strengthening of gypsum based substrates, anhydrite screeds, mastic asphalt screeds and xylolith screeds as well as screeds with old adhesive residues (not suitable with water soluble adhesive residues, e.g. sulphite liquor adhesives)

  1. Stir PCI Gisogrund well prior to the application (and/or shake 1 litre bag well).
  2. Apply a sufficient quantity of undiluted PCI Gisogrund by brush or float to achieve a uniform coat. Avoid puddles forming!
  3. Check strengthening and curing by scratching the surface. Do not apply tile adhesive, wallpaper, paint, plaster or PCI Periplan, PCI Periplan fein or PCI Periplan Tixo before PCI Gisogrund is dry.

Priming and strengthening of absorbent mineral substrates, e.g. concrete, cement screeds, gauged renders, aerated concrete, limestone or similar.

  1. Stir PCI Gisogrund well (and/or shake 1 litre bag well), dilute 1 : 1 with water and mix thoroughly.
  2. Apply a sufficient quantity of diluted PCI Gisogrund by brush or float to achieve a uniform coat.
  3. In case of very absorbent substrates it is recommended to apply a second coat of PCI Gisogrund, diluted 1 : 1 with water, to achieve a more intensive strength and to avoid blow holes forming. Do not apply the second coat until the first one has completely cured.
  4. Do not apply tile adhesive, wallpaper, paint, plaster or PCI Periplan, PCI Periplan fein or PCI Periplan Tixo as floor leveller before the primer is dry (scratch proof).


Application


Preparation Of Substrate

Please note:

  • Do not apply at temperatures below +5 °C and above +30°C.
  • Clean tools with water immediately after use. Once cured material can only be removed by mechanical scraping.
  • In case of partial tiling the entire wall area should be primed (e.g. behind the bathtub or above the tile covering).
  • Apply only one coat of PCI Gisogrund, diluted 1 : 1 with water (consumption: approx. 100 to 140 ml of diluted mix per m²) before wallpapering on plaster/render, gypsum plasterboards etc.
  • The curing time of the wallpaper paste slows down when wallpapering on substrates primed with PCI Gisogrund. Do not paint over woodchip wallpaper etc. before the paste has completely cured.
  • The first coat of PCI Gisogrund can be diluted 1 : 2 with water in case of very absorbent substrates, e.g. aerated concrete.
  • Follow the recommendations issued by the gypsum industry regarding the maximum permissible moisture content, layer thickness of gypsumbased substrates and their surfaces.
  • Avoid puddles forming when applying PCI Gisogrund to floor areas.
  • Use particle filter mask P2 for spray application.
  • PCI Gisogrund is not suitable to prime water-soluble adhesive residues (e.g. sulphite liquor adhesives). They must either be completely removed or primed with PCI Epoxigrund 390 (sprinkle with silica sand while still wet).
  • Old adhesive residues must be completely removed before laying natural stones.
  • Do not apply PCI Gisogrund in underwater situations.
  • Use PCI Gisopakt bonding agent to prime concrete and limestone before applying plaster and gypsum lime plaster.
No reviews
Hi, can you please tell me if I order today when can it be delivered to Kent Paul

Dear Paul,

This product is available off-the-shelf, so if you order it before 3 o'clock it will be shipped same day with next day delivery.

I am happy to help if you have any other questions.

Kind regards

Matt

020 7193 0953

Are you able to ship to Australia? What would the cost be? Thanks

Hello,

How many of them would you like to buy? Would this ba an order for a single product or do you want to order more of them, a pallet for example?

I think shipping is possible, what's the price and time acceptable for you that's the question.

Kind regards

David 020 7193 0953

hi do you do delivery to Perth Western Australia 6110 and if so how much. Thanks

Hello,

How many of them would you like to buy? When do you need this shower tray? This is a new product in our store and we do not have it in stock yet, so the delivery of this product takes longer because it is produced only after placing the order. Production and delivery can take up to 25 days.

Please, let us know how many of them you require and we will prepare a delivery quote.

Kind regards

Agnes D.
Customer service

What are your office opening hours ?Are you open on an Saturday please ?

Hello,

We are not working during weekends, sometimes we do reply to emails and phone calls.

You can visit our Rotherham warehouse from Monday to Friday, 9am - 6 pm.

Let me know if you have any questions about our products or service.

Kind regards

Adam 017 0927 3601

Do you sell the tanking liquid separately?

Hello,

Yes, tanking liquid is available separately, however it's less cost efficient. Waterproofing kit is available at comparable price and contains materials that you will probably need to use anyway.

There's special category in our store: Tanking liquid.

I am happy to assist if you have any further questions.

Kin regards

David 020 7193 0953

If I order the item now. When will it come?

Hi Andrea,

It's too late for us to ship it today, but if you ordered it now we would ship it tomorrow with next day delivery.

Orders placed before 3 o'clock are shipped same day. After 3 o'clock on the next business day.

Kind regards

David 020 7193 0953

how long after manufacture can i use it. I've got 2 bags that i purchased from you last august 1 batch number 21/18. and 1 29/18. thanks

Dear Daniel,

Shelf life of the Nanofug Premium is 12 months, therefore as long as it's not been opened it can still be used within several months.

If the bags have been opened they are probably no longer usable and you will need to supply a new product.

I will be happy to assist if you have any questions.

Kind regards

David 020 7193 0953

We have the wiper tanking kit and have the instructions for the liquid and primer but nothing that says how the sealing tape/membrane is applied to this layer ? Ie: do we need to let it tac or does it go straight onto the tanking liquid ?Any advise ...

Dear Tracey,

Sealing membrane should be applied after applying first layer of tanking liquid. It works as a great adhesive to stick sealing membrane. If the first layer is already dry, you can use tile adhesive which also works well.

Everything should be covered with another tanking liquid layer afterwards.

Kind regards

David M 020 7193 0953

How do I determine the size of waterproofing kit I might need?

Dear Sean,

Joints between the tray and rest of the floor and the walls is the most important part that needs to be sealed off 3 m2˛ of waterproofing kit is enough for that, should also last to cover the tray itself with it as well with 2 coats.

If you wanted to waterproof more space, maybe even entire floor, then you should go for 6 m2˛.

I will be happy to help if you have any questions.

Kind regards

David 020 7193 0953

If I ordered 5L of PCI Gisogrund before 12.00 midday today what is the best delivery time you can provid to NP20 5AH

Dear Ken,

You can place the order before 3 o'clock to have it shipped same day.

The best what we could do is tomorrow before 9 am, but there would be additional £20 delivery fee.

We could also send it for £10 with before noon delivery.

Lastly for free for just tomorrow delivery.

Same applies for packaging of 10l. Please call me to arrange the order.

I will be happy to assist if you have any questions.

Kind regards

David 020 7193 0953

Do we use primer and tanking liquid over the shower liner or just over the joints.

Hello,

The tray doesn't need to be primed. In addition to that, primer is sometimes completely optional. Primer should be used to strengthen the walls and increase it's absorption.

You should apply the primer on the floor and walls, prior to fitting the tray. It should be left until it's dry.

Then you fix the tray to the floor with adhesive, waterproof it and all the surrounding, then proceed to tiling.

In case of any questions I will be happy to help.

Kind regards

David 020 7193 0953

Product added to wishlist
Product added to compare.