Wet room set 8x Backer Boards + 5 m² Underfloor Heating
Backer boards insulation kit with electric underfloor heating set. If you want to use electric underfloor heating on a wooden floor, you must first cover it with backer boards. The boards will guarantee a sturdy, even surface that will adequately insulate the floor and reflect the heat inside the room. After using the boards, you can safely stick the mats and cover them with tiles.
Underfloor heating insulation kit contains of 5 m² (50cm x 10m) heating mat and 8 cement coated building boards (600 x 1200 x 6 mm) – Used for creating a waterproof surface suitable for fixing tiles. These two products make an easy to install set in any bathroom that can be your main or additional heating system.
The Sunfloor heating system can be used in selected area (for ex. just under the shower) or in the entire room. In either case it heats up the floor quickly. It is compatible with our Showerlay XPS boards and drains. Thanks to the XPS boards insulating properties the shower floor heating is very effective and cost efficient.
The mat can be cut and laid in various ways. Just make sure to cover with it only usable are, not under furniture and appliances.
Cement coated building boards – Used for creating a waterproof surface suitable for fixing wall and floor tiles. Manufactured to the highest specification, Imperboard is the benchmark for stable, impervious and durable tiling boards. There are many areas of application including uses in showers, steam rooms and swimming pools. Versatile – Suitable for use on metal and timber stud work, or on existing floors and walls to cover unstable and uneven surfaces.
Imperboard is made from a high-performance waterproof extruded polystyrene, coated with a glass fiber mesh and polymer cement mortar.
If you buy this product you will receive (parts included):
- Heating mat with connecting wire,
- Thermostat,
- 8x Tile Backer Boards (600 x 1200 x 6 mm)
- Floor sensor,
- Flexible sensor tube,
- Inspection card,
- Installation instructions.
If you need different amount of boards or heating mats please contact us.
- Board coverage
- 5,76 m²
- Thickness
- 20 mm
- Size
- 600 x 1200 mm
- Compressive Strength
- 300 kN/m2
- Resistance to soft body Impact load
- 3 x 120 Nm
- Working Temperature Range
- -50 to +75 c
- Fire behaviour
- Class E
- Density
- 36 kg/m3
- Pack quantity
- 8 pieces
- Pack coverage
- 5,76 m²
It is possible to include a complete Underfloor Heating Kit to your order. All you need to do is to choose the required size. Additional package, with heating mat, appropriate thermostat, sensor and instructions will be dispatched together with the other goods.
To calculate required mat size you need to get square coverage of the floor and exclude any permanent / fixed fixtures from them. It is also recommended to buy slightly smaller mat than calculated size - you can shape it but cannot cut the cables, therefore too large mat could not be installed.
SUNFLOOR Underfloor Heating
The SUNFLOOR Electric Heating Mat is a unique type of floor heating mat. The system has been designed to be used on an existing tiled floor or an existing finished floor, so that floor heating can still be installed there. The mat is approximately 4 mm thick and can be included in a layer of adhesive without any demolishing or grinding. The mat fits virtually underneath the surface. This decreases the heating time of the floor, that also makes this system suitable for rooms that are not permanently occupied including bathrooms, studies, playrooms, etc.
Heating mat
Underfloor heating mat set consists of all necessary parts for installation. One Thermostat is needed for every 23 m² of heating mat. It is included as optional, to allow ordering mat for custom areas, for example if you need 13 m² of mat total, you should buy 10 m² with one of the thermostats set as include and 3 m² with thermostat not included. In case you require less mat coverage than possible to buy from our product pictures, for example 14.5 m² you should always round low with your purchase and buy 14 m² as the mat is impossible to cut. It can be shaped but not shortened to size.
- 2.5 meter 3-core supply cable
- Fully encased in an aluminium earthed sheath
- Unique blind connection between the heating and the connection cable
- Chrome/Nickel resistance wire
- PTFE (Teflon) insulation
- PVC protective sheath
- 10 -11 watt per meter resistance wire, 230 Volt
- Cable diameter approximately 4 mm
- Complies with current NEN standards for installation in completely wet rooms
Certified Trust and Exceptional Service
Since obtaining our Trustmark on 18 May 2015, wetroomsdesign.co.uk has consistently demonstrated its
commitment to being a trustworthy online retailer. Our excellent customer reviews are a testament to
our focus on rapid delivery, facilitated by our UK-based warehouse. Stocking thousands of products
available for next-day delivery ensures that you receive your purchases promptly. Additionally, our
dedicated customer service team is always ready to assist you during and after your order, enhancing
your shopping experience. With Trusted Shops Buyer Protection up to £2,500, every purchase is
securely backed, ensuring peace of mind with every transaction.
Product Reviews This tab features detailed reviews of the product you are viewing, offering firsthand insights from customers who have experienced its benefits. While the product available on this page may have similar features to other items in our range, each review specifically addresses this particular model, which is available in various sizes to suit diverse needs and preferences. These reviews provide valuable information to help you make an informed decision, highlighting the distinct characteristics and quality of each product uniquely available here.
You might also like