Videos related to Wet room set Showerlay 900 x 1200 + 1m² Underfloor Heating + Tanking Kit
Wet room set Showerlay 900 x 1200 + 1m² Underfloor Heating + Tanking Kit
Our Wet room complete set contains of a Showerlay Wiper 900 x 1200 mm Line Pure tray with a integrated stainless steel linear drain. The tray is 20 mm thick and has a 2% for-way fall towards the drain. Reinforced XPS foam is a very strong material being lightweight at the same time. It provides excellent acoustic insulation. Shower tray comes with a 1 m2 Sunfloor Electric Underfloor Heating Mat. The sticky heating mat is easy to install and very efficient heating system. Smart WiFi thermostat is also included. And the last part of the set is a Tanking Kit for waterproofing the shower area before tiling. It includes 4kg of premium tanking liquid, 1l of primer, 10 m of sealing tape, 2 pipe collars, and 2 internal sealing corners. This set is all you need for your walk-in, wet-room shower.
SHOWERLAY WIPER
Showerlay 900 x 1200 mm is designed to give you an easy access wet room. It is easy to cut down to size and install. The former is has a ready made 2% fall towards the drain, provides great acoustic insulation and is also lightweight.
Suitable high quality shower drainage is included in the former. It comes with a 600 mm long stainless steel linear end drain. It also comes with grating which is 64 mm wide, leaving an 8 mm wide channel for water to flow. Pure is a slot cover that should be filled with tiles, so that, after the installation the only visible part of the tray would be the channel. The height from the shower tray surface to the top edge of the vertical upstand is 15 mm. McAlpine siphon trap with a capacity of 26 l/min and a 20 mm high water seal is also included. Showerlay is a complete unit with everything you need.
SUNFLOOR UNDERFLOOR HEATING
It is a modern and easy-to-install solution that can be your main or additional heating system. The mat can be easily hidden in the adhesive layer directly under the tiles.
The heating system can be used in selected area (for ex. just under the shower) or in the entire room. In either case it heats up the floor quickly. Thanks to the XPS boards insulating properties the shower floor heating is very effective and cost efficient.
TANKING KIT
The tanking kit is a ready-mixed, under-tile tanking system to protect water sensitive substrates from exposure to water. Suitable for wet areas not exposed to pressurised water, such as bathrooms, showers in residential buildings, hotels, old people's homes and hospitals. Ready to use, no mixing required and easy to apply with a roller. The kit includes a high performance joint reinforcing tape to protect against movement in floor joins and corners etc. The contents are all INSIDE the bucket.
- Grate style
- Pure (slot)
- Height
- 1200 mm
- Width
- 900 mm
- Thickness
- 20 mm
- Trimming
- Both sides: up to 50 mm.
- Material
- XPS foam sheet
- Reinforcement
- Cementous glue & waterproofing membrane fabric
- Fall
- 4-way 2% towards the drain
- Model
- Line
Complete Underfloor Heating Kit
It is possible to include a complete Underfloor Heating Kit to your order. All you need to do is to choose the required size. Additional package, with heating mat, appropriate thermostat, sensor and instructions will be dispatched together with the other goods.
To calculate required mat size you need to get square coverage of the floor and exclude any permanent / fixed fixtures from them. It is also recommended to buy slightly smaller mat than calculated size - you can shape it but cannot cut the cables, therefore too large mat could not be installed.
SUNFLOOR Underfloor Heating
The SUNFLOOR Electric Heating Mat is a unique type of floor heating mat. The system has been designed to be used on an existing tiled floor or an existing finished floor, so that floor heating can still be installed there. The mat is approximately 4 mm thick and can be included in a layer of adhesive without any demolishing or grinding. The mat fits virtually underneath the surface. This decreases the heating time of the floor, that also makes this system suitable for rooms that are not permanently occupied including bathrooms, studies, playrooms, etc.
Heating mat
Underfloor heating mat set consists of all necessary parts for installation. One Thermostat is needed for every 23 m² of heating mat. It is included as optional, to allow ordering mat for custom areas, for example if you need 13 m² of mat total, you should buy 10 m² with one of the thermostats set as include and 3 m² with thermostat not included. In case you require less mat coverage than possible to buy from our product pictures, for example 14.5 m² you should always round low with your purchase and buy 14 m² as the mat is impossible to cut. It can be shaped but not shortened to size.
It is possible to include a complete Underfloor Heating Kit to your order. All you need to do is to choose the required size. Additional package, with heating mat, appropriate thermostat, sensor and instructions will be dispatched together with the other goods.
To calculate required mat size you need to get square coverage of the floor and exclude any permanent / fixed fixtures from them. It is also recommended to buy slightly smaller mat than calculated size - you can shape it but cannot cut the cables, therefore too large mat could not be installed.
SUNFLOOR Underfloor Heating
The SUNFLOOR Electric Heating Mat is a unique type of floor heating mat. The system has been designed to be used on an existing tiled floor or an existing finished floor, so that floor heating can still be installed there. The mat is approximately 4 mm thick and can be included in a layer of adhesive without any demolishing or grinding. The mat fits virtually underneath the surface. This decreases the heating time of the floor, that also makes this system suitable for rooms that are not permanently occupied including bathrooms, studies, playrooms, etc.
Heating mat
Underfloor heating mat set consists of all necessary parts for installation. One Thermostat is needed for every 23 m² of heating mat. It is included as optional, to allow ordering mat for custom areas, for example if you need 13 m² of mat total, you should buy 10 m² with one of the thermostats set as include and 3 m² with thermostat not included. In case you require less mat coverage than possible to buy from our product pictures, for example 14.5 m² you should always round low with your purchase and buy 14 m² as the mat is impossible to cut. It can be shaped but not shortened to size.
- 2.5 meter 3-core supply cable
- Fully encased in an aluminium earthed sheath
- Unique blind connection between the heating and the connection cable
- Chrome/Nickel resistance wire
- PTFE (Teflon) insulation
- PVC protective sheath
- 10 -11 watt per meter resistance wire, 230 Volt
- Cable diameter approximately 4 mm
- Complies with current NEN standards for installation in completely wet rooms
Certified Trust and Exceptional Service
Since obtaining our Trustmark on 18 May 2015, wetroomsdesign.co.uk has consistently demonstrated its
commitment to being a trustworthy online retailer. Our excellent customer reviews are a testament to
our focus on rapid delivery, facilitated by our UK-based warehouse. Stocking thousands of products
available for next-day delivery ensures that you receive your purchases promptly. Additionally, our
dedicated customer service team is always ready to assist you during and after your order, enhancing
your shopping experience. With Trusted Shops Buyer Protection up to £2,500, every purchase is
securely backed, ensuring peace of mind with every transaction.
Product Reviews This tab features detailed reviews of the product you are viewing, offering firsthand insights from customers who have experienced its benefits. While the product available on this page may have similar features to other items in our range, each review specifically addresses this particular model, which is available in various sizes to suit diverse needs and preferences. These reviews provide valuable information to help you make an informed decision, highlighting the distinct characteristics and quality of each product uniquely available here.
No reviews
You might also like
Our Wet room complete set contains of a Showerlay Wiper 800 x 1200 mm Line Pure tray with a integrated stainless steel linear drain. The tray is 20 mm thick and has a 2% for-way fall towards the drain. Reinforced XPS foam is a very strong material being lightweight at the same time. It provides excellent acoustic insulation. Shower tray comes with a 1 m2...
Our Wet room complete set contains of a Showerlay Wiper 800 x 1200 mm Line Pure tray with a integrated stainless steel linear drain. The tray is 20 mm thick and has a 2% for-way fall towards the drain. Reinforced XPS foam is a very strong material being lightweight at the same time. It provides excellent acoustic insulation.
Shower tray comes with a 1 m2...
Our Wet room complete set contains of a Showerlay Wiper 900 x 1200 mm Line Pure tray with a integrated stainless steel linear drain. The tray is 20 mm thick and has a 2% for-way fall towards the drain. Reinforced XPS foam is a very strong material being lightweight at the same time. It provides excellent acoustic insulation.
Shower tray comes with a 1 m2...
Backer boards insulation kit with electric underfloor heating set. If you want to use electric underfloor heating on a wooden floor, you must first cover it with backer boards. The boards will guarantee a sturdy, even surface that will adequately insulate the floor and reflect the heat inside the room. After using the boards, you can safely stick the mats...